PASSIVEFRONT  SURROUND

 

 

Your entry into the fascinating world
of Immersive Audio

THE10 PASSIVE WEDGE 30

The design objective for this model was to offer a pre-angled version of THE10 PASSIVE ON WALL that can be installed in multiple locations where angling the speakers is mandatory. Such locations include but are not limited to front wide, Atmos and DTS top front and rear, front or rear high surrounds, side surrounds etc. 

The driver design is perfect for wide angle axi-symmetric radiation to cover a large listening area, with its 30-degree pre-angle meeting the requirements of most 3D home theater builds according to current CEDIA, Dolby and DTS specs. The very flexible speaker mounting and orientation options ensure best possible localization, immersion, and tonal balance at the main listening position while minimizing localization shifts for side seats.

THE10 PASSIVE WEDGE 30 is an enormously dynamic and powerful speaker. Its high efficiency and high-power handling allow it to reach reference volume levels and obtain an impressive cinema sound experience even with low amplifier power. 

Technische Daten

Speaker type

Time coherent 10" coax point-source

Principle 

Vented 

Passive | Active

Passive

SPL

Calculated data
120 dB cont. / 123 dB peak

Frequency range 

Calculated data
75 Hz - 20 kHz / -3dB

Efficiency 

98 dB  / 1W/m

Power handling 

500 W

Impedance 

8 Ω 

Woofer

10" woofer 

Tweeter

1" Compression driver

 Directivity horizontal x vertical in Deg°

85° x 85°

Input terminal

One 4-conductor Phoenix 12 AWG (3,3 mm²) push on binding post

Enclousure

MDF

Width

14,7 " | 360 mm vertical
14,7 " | 360 mm horizontal

Hight

15,04 " | 382 mm vertical
8,62 " | 219 mm horizontal

Depth (without grille)

8,62 " | 219 mm vertical
15,04 " | 382 mm horizontal

Weight 

28,66 lbs | 13 kg

Finish 

Matte black

Mounting 

Metal wall or ceiling mounting brackets that allows to angle the speaker further in two axes + 8 wall mount brackets, which allow to hang the speaker in multiple ways on the wall + VESA 200 x 100 mounting points 


The THE10 PASSIVE WEDGE 30 is supplied with a front cover as standard

Technische Änderungen vorbehalten
 

×

Subscribe